Insignia NS-TDRG67W1 User guide - Page 43

USER MAINTENANCE INSTRUCTIONS 12-Cycle Electric and Gas Dryers PROBLEM SOLUTION Dryer shuts off before the clothes are dried. Dryer has an odd odor. Clothing is still wrinkled after using the Wrinkle Care setting. There is lint on the clothing. • The dryer load is too small. Add more items or a few towels and restart the cycle. • The dryer load is too large. Remove some items and restart the cycle. • Consider using a Manual Dry cycle. • Your dryer draws air from the surrounding room air. Household odors from paint, varnish, strong cleaners, and so forth, may enter your dryer with the surrounding room air. This is normal. When these odors linger in the air, ventilate the room completely before using your dryer. • Small loads of one to four items work best. • If the dryer load is too large, items cannot tumble freely. Try loading fewer items. • Make sure that the items in the dryer load are similar. The Wrinkle Care setting works best when the items in the dryer load are similar-type items. • Check pockets thoroughly before washing and drying clothes. Things like paper or tissue can break up into small pieces that turn into lint. • Clean the lint filter before every cycle. Some loads that produce high amounts of lint can clog the filter. • Some fabrics are lint producers (like a fuzzy white cotton towel) and they should be dried separately from clothes that are lint trappers (like a pair of black linen pants). • Divide larger loads into smaller loads for drying. www.insigniaproducts.com 43