Insignia NS-UZ17WH0 User Guide - Page 7

Touch pad controls, Setting up your freezer, Before using your freezer, Finding a suitable location

Page 7 highlights

Touch pad controls High temperature indicator/alert Lower temperature button Temperature indicator 17 or 21 Cu. Ft. Upright Convertible Freezer/Refrigerator Door open indicator/alarm Raise temperature button Quick freeze button Control Panel Lock/Unlock button Freezer/Fridge mode button Setting up your freezer Before using your freezer • Remove the exterior and interior packing, especially the foam packing between the outside condenser and the cabinet. • Let the freezer stand upright for approximately two hours before connecting it to power. This reduces the possibility of a malfunction in the cooling system from improper handling during transportation. • Wash the inside with a damp, warm cloth and a baking soda solution (two tablespoons in a quart of water), then wipe dry with a dry cloth. Do this periodically to keep your freezer looking new. • For proper operation, it's very important that you level the freezer using the leveling feet. If this is not done, the door may not close or seal properly, causing cooling, frost, and moisture problems. Turn the leveling feet clockwise to raise that side of the freezer or counterclockwise to lower that side. The leveling feet are easier to adjust if you have someone push against the top of the freezer to take some weight off. • When moving your freezer, do not tilt it beyond 45° from upright. Finding a suitable location • Place your freezer on a floor that is strong enough to support the freezer when it is fully loaded. • This freezer is designed to be free standing only, and should not be recessed or built-in. www.insigniaproducts.com 7

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19

7
17 or 21 Cu. Ft. Upright Convertible Freezer/Refrigerator
www.insigniaproducts.com
Touch pad controls
Setting up your freezer
Before using your freezer
Remove the exterior and interior packing, especially the foam packing
between the outside condenser and the cabinet.
Let the freezer stand upright for approximately two hours before connecting it
to power. This reduces the possibility of a malfunction in the cooling system
from improper handling during transportation.
Wash the inside with a damp, warm cloth and a baking soda solution (two
tablespoons in a quart of water), then wipe dry with a dry cloth. Do this
periodically to keep your freezer looking new.
For proper operation, it’s very important that you level the freezer using the
leveling feet. If this is not done, the door may not close or seal properly,
causing cooling, frost, and moisture problems. Turn the leveling feet clockwise
to raise that side of the freezer or counterclockwise to lower that side. The
leveling feet are easier to adjust if you have someone push against the top of
the freezer to take some weight off.
When moving your freezer, do not tilt it beyond 45° from upright.
Finding a suitable location
Place your freezer on a floor that is strong enough to support the freezer when
it is fully loaded.
This freezer is designed to be free standing only, and should not be recessed
or built-in.
Raise temperature
button
Freezer/Fridge
mode button
Temperature indicator
High temperature
indicator/alert
Door open
indicator/alarm
Lower temperature
button
Quick freeze
button
Control Panel
Lock/Unlock button