Insignia NS-WBRDVD2 User Manual (English) - Page 10

NS-WBRDVD2-WBRDVD2-CA_10-0920_MAN_V5.book Page 6 Friday, August 13, 2010 1:08 PM NS-WBRDVD2/NS-WBRDVD2-CA Wireless Blu-ray Disc Player Connecting to your home network Note This player can be connected to your wired network using the Ethernet port on the back of your player or by using a wireless network. Connecting using a wireless network Another connection option is to use an access point or a wireless router as shown in the example below. To connect to the Internet with a wireless network: 1 Set up your access point or wireless router (if not already set up). Player Wireless router 2 Press ENTER. The Settings menu opens. 3 Press or to select Network, then press ENTER. 4 Press or to select Wireless, then press ENTER. The Wireless Settings screen opens. 6 Press or to select the wireless network you want your player to connect to. A Network Setup screen opens with the following options: • Connect-Connect to this network. • Disconnect-Disconnect from this network. • Delete-Delete the current network. • WPS Pin-Create a random PIN number password. 7 If your network does not use encryption, press or to select Connect, then press ENTER. If the wireless network is working, you should see a checkmark and a connected message on the TV. If the message does not appear, repeat the steps above. OR If your network uses encryption: 1 Press or to select the Password field, then press ENTER. An on-screen keyboard opens. 2 Press or to select the first letter in the password, then press ENTER. Repeat this step to enter the rest of the password. If you make a mistake, use backspace key to delete the character. 3 After you enter the password, select the circled X in the upper right-hand corner of the keyboard, then press ENTER to close the keyboard. 4 Press or to select Connect, then press ENTER. If the wireless network is working, you should see a checkmark and a connected message on the TV. If the message does not appear, repeat the steps above. To connect to a wireless network using Wi-Fi Protected Setup (WPS), see "Setting up WiFi protection (WPS)" on page 20. Connecting using a wired network To connect to the ethernet with a wired network: 1 Connect a network cable to the INTERNET jack on the back of your player and into a wired router using a commercially available LAN or Ethernet cable (Cat 5 or better, with RJ45 connectors). Back of player Network cable Wired router 5 Press or to select Network List, then press ENTER. The Network List screen opens, showing a list of available wireless networks. 6 www.insigniaproducts.com