Insignia NS-WBRDVD2 User Manual (English) - Page 7

NS-WBRDVD2-WBRDVD2-CA_10-0920_MAN_V5.book Page 3 Friday, August 13, 2010 1:08 PM Wireless Blu-ray Disc Player Front Remote control # Item 1 Disc tray 2 Display screen 3 Remote control sensor 4 (open/close) 5 (play/pause) 6 (stop) 7 (previous) 8 (next) 9 (standby/on) 10 USB port Description Insert a disc with the label side up into this tray. To open or close the tray, press (open/close). Displays information about disc playback. Receives signals from the remote control. Do not block. Press to open or close the disc tray. Press to start or pause playback. Press to stop playback. To resume playback, press or to select DVD/BD-ROM, then press ENTER. Depending on the disc, playback starts where it stopped or at the beginning of the disc. If you press (stop) twice, playback stops completely. To start playback again, press (play/pause). Press to go to the previous title, chapter, or track. Press to go to the next title, chapter, or track. Press to turn on your player or put your player in standby mode. When your player is in standby mode, power is still entering your player. To disconnect power, unplug the power cord. Plug a USB flash drive into this port. Back # Item Description 1 Power connector Plug the power cord into a power outlet. 2 ETHERNET jack Connect an ethernet cable to this jack and to a broadband Internet jack to access BD-Live information or run connected applications. 3 HDMI OUT Connect a TV to this jack using an HDMI cable. An HDMI cable carries both video and audio. 4 VIDEO OUT Connect a TV to this jack and to the AUDIO OUT L/R jacks using a composite video cable (provided). 5 Connect a TV to these jacks and to the AUDIO OUT L/R COMPONENT VIDEO OUT jacks using a component video cable and audio cable. 6 AUDIO OUT L/R Connect the audio for a composite TV or component video TV to these jacks. 7 OPTICAL DIGITAL OUT Connect an optical digital amplifier to this jack to play the sound through the amplifier's speakers. 8 COAXIAL DIGITAL OUT Connect a coaxial digital amplifier to this jack to play the sound through the amplifier's speakers. 9 WIFI antenna Connects the player wirelessly to your wireless network. # Item 1 STANDBY/ON 2 Number buttons 3 SEARCH 4 (fast reverse) 5 (fast forward) 6 ZOOM 7 (stop) Description Press to turn on your player or put your player in standby mode. When your player is in standby mode, power is still entering your player. To disconnect power, unplug the power cord. In playback mode, press SEARCH, then press the number buttons to enter a title, chapter, track, or time. In menu mode, press to enter numbers. Press to search for a title, chapter, or specific time on a disc. For more information, see "Searching for a title, chapter, or elapsed time" on page 11. Press to fast reverse. Each time you press this button, the fast-reverse speed decreases from Fast x 2, Fast x 4, Fast x 8, Fast x 16, Fast x 32, Fast x 64, Fast x 128. Press (play/pause) to resume normal playback. Press to fast forward. Each time you press this button, the fast-forward speed increases from Fast x 2, Fast x 4, Fast x 8, Fast x 16, Fast x 32, Fast x 64, Fast x 128. Press (play/pause) to resume normal playback. Press to zoom in on a video. Each time you press this button, the magnification level changes. This button is only used for DVD discs or picture files. Press to stop playback. To resume playback, press or to select DVD/BD-ROM, then press ENTER. Depending on the disc, playback starts where it stopped or at the beginning of the disc. If you press (stop) twice, playback stops completely. To start playback again, press (play/pause). www.insigniaproducts.com 3