Insignia NSRSW211 User Manual (English) - Page 15

Rocketboost™ Wireless Subwoofer • The Rocketboost network must contain at least one wireless sender device and one wireless receiver device. The wireless subwoofer is a wireless receiver and it is used with a wireless sender (sold separately). Problem Solution No communication between the Rocketboost sender and subwoofer. No sound Sound interference • Make sure that the power indicators of the Rocketboost wireless sender and subwoofer are lit solidly. If the indicators are blinking, see "Connecting your subwoofer for wireless mode" on page 11. • If the joining process is failing, make sure that only one of your Rocketboost devices has the Hub switch enabled. Note that the hub device is the only device with the green power indicator. Non-hub devices have a blue power indicator. • Check the volume level of the wireless subwoofer or audio sources connected to the wireless sender. • Make sure that all of the audio cables are connected correctly. • Make sure that the power indicators of the Rocketboost wireless sender and wireless receiver devices are lit solidly. If the indicators are blinking, see "Connecting your subwoofer for wireless mode" on page 11. • Make sure the audio source connected to your wireless sender is On. • Make sure the wireless sender or wireless receiver devices are not Muted. The Receive mode indicator light blinks when the device is muted. • Experiment with different orientations or locations of your wireless sender device. • Make sure your wireless sender device is more than 18 inches from any WiFi routers you may have. • Shorten the distance between the Rocketboost wireless devices. The maximum distance is 150 feet (45 m), but this distance is reduced as the wireless signal passes through walls or other obstructions. • It is possible other devices like cordless phones, microwaves, wireless routers, etc. may be causing interference. Try turning one device off at a time to determine which device is causing interference. • If your cordless phone or wireless router is causing interference try changing the channel it is using. Please refer to your device's owner manual. Specifications Wireless Subwoofer Power supply 120 V AC~60 Hz/0.9 A Maximum RCA input signal level 2.0 Vrms Crossover 80 Hz - 150 Hz Speaker impedance 3 ohms Rated output power (at 10% thd) 75 W Dimensions (W ×H × D) Weight 11 × 11 × 11 inches (28 × 28 × 28 cm) 10.4 lb. (4.7 kg) www.insigniaproducts.com 15