Insignia NSRSW211 User Manual (English) - Page 4

Rocketboost™ Wireless Subwoofer Package contents The box should contain the following: User Guide Wireless Subwoofer Rocketboost™ Wireless Subwoofer NS-RSW211 User Guide Congratulations on your purchase of a high-quality Insignia product. Your Wireless Subwoofer represents the state of the art in powered subwoofers and is designed for reliable and trouble-free performance. Use this guide for initial setup of your Wireless Subwoofer. See your User Guide for more information on using your Wireless Subwoofer. Step 1 Connect the power cord to a 120 V power outlet. Package contents • NS-RSW211 Wireless Subwoofer • User Guide • Quick Setup Guide Step 2 Turn on the power switch. Your wireless subwoofer must now be joined or wirelessly connected to a wireless sender/receiver, so that audio can be sent from the wireless sender/receiver to the wireless subwoofer. Quick Setup Guide NS-RSW211 Wireless Subwoofer To join your wireless subwoofer to your Rocketboost network: 1 Set the HUB switch on the wireless sender/receiver to DISABLE. • The power indicators turn green when the HUB switch is set to ENABLE. • The power indicators turn blue when the HUB switch is set to DISABLE. 2 Press and hold the POWER button on your Rocketboost Hub device for more than three seconds to put it into joining mode. The power indicator starts blinking rapidly and the unit stays in joining mode for 30 seconds. 3 Press and hold the button on the wireless sender/receiver for more than three seconds so the Hub device and wireless sender/receiver enter joining mode. • The power indicators light steadily if the joining was successful. • The power indicators blink slowly if the joining was not successful. 4 Press and hold the POWER button on your Rocketboost Hub device for more than three seconds to put it into joining mode. The power indicator starts blinking rapidly and the unit stays in joining mode for 30 seconds. 5 Press and hold the button on the wireless subwoofer for more than three seconds so the Hub device and wireless subwoofer enter joining mode. • The power indicators light steadily if the joining was successful. • The power indicators blink slowly if the joining was not successful. • Rated Impedance: 3 ohms • Rated frequency range: 50Hz-20KHz • Rated power input: 75W • Max power input: 100W • Dimensions: 13.7 (H) × 13.6 (W) × 13.6 (D) inches (34.7 (H) × 34.5 (W) × 34.5 (D) cm) • Weight: 10.4 lbs. (4.7 kg) NOTE One-year limited warranty Visit www.insigniaproducts.com for details. Contact Insignia: For customer service, call 1-877-467-4289 www.insigniaproducts.com ' 2011 BBY Solutions, Inc. All rights reserved. All rights reserved. INSIGNIA is a trademark of BBY Solutions, Inc. Registered in some countries. All other products and brand names are trademarks of their respective owners. ENGLISH 11-0309 Quick Setup Guide Important safety instructions The lightning flash with arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK: DO NOT REMOVE SCREWS, COVERS OR THE CABINET. NO USER SERVICING PARTS INSIDE. 㕐 REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. 1 Read these instructions. 2 Keep these instructions. 3 Heed all warnings. 4 Follow all instructions. 5 Do not use this apparatus near water. 6 Clean only with a dry cloth. 7 Do not block any ventilation openings. Install in accordance with the manufacturer's instructions. 8 Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9 Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. 4 www.insigniaproducts.com