Intel 710 SSD Solid-State Drive Toolbox User Guide - Page 24

Intel® Solid-State Drive Toolbox User Guide Mobile Systems with Shock Sensor If you have an Intel SSD installed in a mobile system with shock sensor, make sure the shock sensor on the mobile system is disabled. Note: Intel SSDs are not affected with performance degradation caused by shock or vibration in specified limits, and therefore, can run with the shock sensor disabled. See the Intel Solid-State Drive Product Specification for your Intel SSD for specified limits. See your system documentation for information on disabling this feature. Intel SSDs in RAID Configurations Using Intel® Rapid Storage Technology Driver To obtain higher performance from RAID configurations consisting of Intel SSDs and Intel® Rapid Storage Technology (Intel® RST), make sure Intel® RST Write Back Cache is enabled. Note: Enabling Write Back Cache increases the chance of system data loss during a power-loss event. (However, all data written to the SSD will be committed to NAND during a power-loss event.) See your system documentation for information on enabling or disabling this feature. Mobile Systems without Intel® Rapid Storage Technology or Intel® Matrix Storage Manager To obtain higher performance on mobile systems with an Intel SSD without Intel Rapid Storage Technology or Intel Matrix Storage Manager, enable DIPM (Device Initiated Power Management) on your mobile system. See your system documentation for instructions. Intel® Solid-State Drive Toolbox User Guide 24 September 2011 Order Number: 325912-001US