Intel D845GBV Technical Product Specification for Intel Desktop Boards using t - Page 73

BIOS Setup Program 4.4.9 Chipset Configuration Submenu To access this menu, select Advanced on the menu bar and then Chipset Configuration. Maintenance Main Advanced Security Power PCI Configuration Boot Configuration Peripheral Configuration IDE Configuration Diskette Configuration Event Log Configuration Video Configuration USB Configuration Chipset Configuration The submenu represented in Table 38 is for configuring chipset options. Boot Exit Table 38. Chipset Configuration Submenu Feature ISA Enable Bit Options • Disabled (default) • Enabled PCI Latency Timer Extended Configuration SDRAM Frequency (For Desktop Boards with DDR SDRAM) • 32 (default) • 64 • 96 • 128 • 160 • 192 • 224 • 248 • Default (default) • User Defined • Auto (default) • 200 MHz • 266 MHz SDRAM Frequency (For Desktop Boards with SDR SDRAM) No options Description When set to Enable, a PCI-to-PCI bridge will only recognize I/O addresses that do not alias to an ISA range (within the bridge's assigned I/O range). Allows you to control the time (in PCI bus clock cycles) that an agent on the PC bus can hold the bus when another agent has requested the bus. Allows the setting of extended configuration options. Allows override of detected memory frequency value. NOTE: If SDRAM Frequency is changed, you must reboot for the change to take effect. After changing this setting and rebooting, the System Memory Speed parameter in the Main menu will reflect the new value. Displays the system memory speed (133 MHz). continued 73