Intel D845GBV Product Supplement Document for the Intel Desktop Board D845GBV - Page 12
Connectors
View all Intel D845GBV manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
Product Supplement Document for the Intel Desktop Board D845GBV 2.2 Connectors CAUTION Only the back panel USB, front panel USB, VGA, and PS/2 connectors have overcurrent protection. The Desktop Boards' internal connectors are not overcurrent protected and should connect only to devices inside the computer's chassis, such as fans and internal peripherals. Do not use these connectors to power devices external to the computer's chassis. A fault in the load presented by the external devices could cause damage to the computer, the interconnecting cable, and the external devices themselves. This section describes the Desktop Board's connectors. The connectors can be divided into the following groups: • Back panel I/O connectors (see page 13) PS/2 keyboard and mouse USB Parallel port Serial port VGA LAN (optional) Audio (line out, line in, and mic in) • Internal I/O connectors (see page 14) Audio (auxiliary line input and ATAPI CD-ROM, and front panel audio) Fans Power Add-in boards (PCI and AGP) CNR (optional) IDE Diskette drive SCSI LED Chassis intrusion • External I/O connectors (see page 21) Front panel USB Front panel (power/sleep/message-waiting LED, power switch, hard drive activity LED, reset switch, and auxiliary front panel power LED) Auxiliary front panel power/sleep/message-waiting LED 12