Intel D845GBV Product Supplement Document for the Intel Desktop Board D845GBV - Page 16

Integrator, S Note

Get Intel D845GBV PDF manuals and user guides View all Intel D845GBV manuals
Add to My Manuals
Save this manual to your list of manuals

Page 16 highlights

Product Supplement Document for the Intel Desktop Board D845GBV Table 4. Front Panel Audio Connector Pin Signal Name Pin 1 MIC_IN 2 3 MIC_BIAS 4 5 RIGHT_OUT 6 7 Ground 8 9 LEFT_OUT 10 Signal Name Ground +5 V RIGHT_IN Key LEFT_IN # INTEGRATOR'S NOTE The front panel audio connector is alternately used as a jumper block for routing audio signals. Refer to Section 2.3.1 on page 24 for more information. Table 5. Pin 1 2 3 4 Auxiliary Line In Connector Signal Name Left auxiliary line in Ground Ground Right auxiliary line in Table 6. Rear Chassis Fan Connector Pin Signal Name 1 (Note) 2 +12 V 3 REAR_TACH_OUT Note: Pin 1 is Control if the Desktop Board uses the hardware monitoring and fan control ASIC. Pin 1 is Ground if the Desktop Board uses the hardware monitoring ASIC. Table 7. Pin 1 2 3 4 ATAPI CD-ROM Connector Signal Name Left audio input from CD-ROM CD audio differential ground CD audio differential ground Right audio input from CD-ROM 16

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
Product Supplement Document for the Intel Desktop Board D845GBV
16
Table 4.
Front Panel Audio Connector
Pin
Signal Name
Pin
Signal Name
1
MIC_IN
2
Ground
3
MIC_BIAS
4
+5 V
5
RIGHT_OUT
6
RIGHT_IN
7
Ground
8
Key
9
LEFT_OUT
10
LEFT_IN
#
INTEGRATOR
’
S NOTE
The front panel audio connector is alternately used as a jumper block for routing audio signals.
Refer to Section 2.3.1 on page 24 for more information.
Table 5.
Auxiliary Line In Connector
Pin
Signal Name
1
Left auxiliary line in
2
Ground
3
Ground
4
Right auxiliary line in
Table 6.
Rear Chassis Fan Connector
Pin
Signal Name
1
(Note)
2
+12 V
3
REAR_TACH_OUT
Note:
Pin 1 is
Control
if the Desktop Board uses the hardware monitoring and fan control ASIC.
Pin 1 is
Ground
if the Desktop Board uses the hardware monitoring ASIC.
Table 7.
ATAPI CD-ROM Connector
Pin
Signal Name
1
Left audio input from CD-ROM
2
CD audio differential ground
3
CD audio differential ground
4
Right audio input from CD-ROM