Intel D845PEBT2 Product Specification - Page 28
I/O Controller
View all Intel D845PEBT2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
Intel Desktop Board D845PEBT2 Technical Product Specification 1.10 I/O Controller The SMSC LPC47M172 I/O controller provides the following features: • One serial port • One parallel port with Extended Capabilities Port (ECP) and Enhanced Parallel Port (EPP) support • Serial IRQ interface compatible with serialized IRQ support for PCI systems • PS/2-style mouse and keyboard interfaces • Interface for one 1.2 MB or 1.44 MB diskette drive • Intelligent power management, including a programmable wake-up event interface • PCI power management support The BIOS Setup program provides configuration options for the I/O controller. For information about SMSC LPC47M172 I/O controller Refer to http://www.smsc.com 1.10.1 Serial Ports The Desktop Board D845PEBT2 has one serial port connector located on the back panel. The serial port supports data transfers at speeds up to 115.2 kbits/sec with BIOS support. For information about The location of the serial port connector The signal names of the serial port connector Refer to Figure 11, page 52 Table 19, page 53 1.10.2 Parallel Port The 25-pin D-Sub parallel port connector is located on the back panel. Use the BIOS Setup program to set the parallel port mode. For information about The location of the parallel port connector The signal names of the parallel port connector Setting the parallel port's mode Refer to Figure 11, page 52 Table 20, page 54 Table 71, page 103 1.10.3 Diskette Drive Controller The I/O controller supports one diskette drive. Use the BIOS Setup program to configure the diskette drive interface. For information about The location of the diskette drive connector The signal names of the diskette drive connector The supported diskette drive capacities and sizes Refer to Figure 14, page 61 Table 40, page 65 Table 74, page 107 28