Intel D945GCLF2D Product Guide - Page 15
LAN Subsystem, LAN Subsystem Software, LAN Status LEDs - drivers
View all Intel D945GCLF2D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
Desktop Board Features LAN Subsystem The LAN, based on the RealTek RTL8111C Ethernet Controller, provides the following functions: • 10/100/1000 Mb/s Gigabit Ethernet LAN • Support for RJ-45 connector with status indicator LEDs • Programmable transit threshold • Configurable EEPROM that contains the MAC address LAN Subsystem Software For LAN software and drivers, refer to the Intel Desktop D945GCLF2D link on Intel's World Wide Web site at http://support.intel.com/support/motherboards/desktop. LAN Status LEDs Two LEDs are built into the RJ-45 LAN connector located on the back panel (see Figure 3). These LEDs indicate the operating states of the LAN. Figure 3. LAN Status LEDs Table 3 describes the LED states when the board is powered up and the LAN subsystem is operating. Table 3. LAN Status LEDs LED Activity (A) Speed (B) LED Color Green N/A Green Yellow LED State Blinking Off On (steady state) On (steady state) Indicates LAN activity is occurring. 10 Mbits/s data rate is selected. 100 Mbits/s data rate is selected. 1000 Mbits/s data rate is selected. 15