Intel DG43GT Product Guide - Page 17

Audio Subsystem, Table 3. Back Panel and Front Panel Audio Jack Retasking Support - drivers

Page 17 highlights

Desktop Board Features Audio Subsystem The onboard audio subsystem consists of the following: • Intel ICH10 I/O controller hub • Realtek ALC888S 10-channel audio codec • Front panel audio header with support for: ⎯ Intel® High Definition Audio ⎯ AC '97 Audio • Onboard 4-pin S/PDIF output header • Back panel audio connectors including an optical S/PDIF output connector The audio subsystem supports the following features: • A signal-to-noise (S/N) ratio of 95 dB • Independent multi-streaming 7.1 audio (using the back panel audio connectors) and stereo (using the front panel audio header) Go to the following locations for more information about: • Audio drivers and utilities http://support.intel.com/support/motherboards/desktop/ • Location of the onboard audio headers, Figure 22 on page 46 • The location and description of the back panel audio connectors, Figure 23 on page 51 Table 3 lists the supported functions for the front panel and back panel audio jacks. Table 3. Back Panel and Front Panel Audio Jack Retasking Support Front Jack Mic Headphones Speaker Line In Side Surround Rear Surround Green Default Front Panel Control Panel Pink Default Blue Green Pink Black Orange Default Control Panel Control Panel Default Back Panel Default Control Panel Default Center/ Subwoofer Default 17

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82

Desktop Board Features
17
Audio Subsystem
The onboard audio subsystem consists of the following:
Intel ICH10 I/O controller hub
Realtek ALC888S 10-channel audio codec
Front panel audio header with support for:
Intel
®
High Definition Audio
AC ’97 Audio
Onboard 4-pin S/PDIF output header
Back panel audio connectors including an optical S/PDIF output connector
The audio subsystem supports the following features:
A signal-to-noise (S/N) ratio of 95 dB
Independent multi-streaming 7.1 audio (using the back panel audio connectors)
and stereo (using the front panel audio header)
Go to the following locations for more information about:
Audio drivers and utilities
Location of the onboard audio headers, Figure 22 on page 46
The location and description of the back panel audio connectors, Figure 23 on
page 51
Table 3 lists the supported functions for the front panel and back panel audio jacks.
Table 3. Back Panel and Front Panel Audio Jack Retasking Support
Jack
Mic
Headphones
Front
Speaker
Line
In
Side
Surround
Rear
Surround
Center/
Subwoofer
Front Panel
Green
Default
Control Panel
Pink
Default
Back Panel
Blue
Control Panel
Default
Control Panel
Green
Control Panel
Default
Pink
Default
Black
Default
Orange
Default