Intel DG43GT Product Guide - Page 51
Chassis Intrusion Header, Connecting to the Audio System - driver
UPC - 735858209175
View all Intel DG43GT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
Installing and Replacing Desktop Board Components Chassis Intrusion Header Figure 22, I shows the location of the chassis intrusion header. This header can be connected to a mechanical switch on the chassis to detect if the chassis cover is removed. Table 14 shows the pin assignments for the chassis intrusion header. Table 14. Chassis Intrusion Header Signal Names Pin Signal Name 1 Intruder# 2 Ground Connecting to the Audio System After installing the audio driver, the multi-channel audio feature can be enabled. Figure 23 shows the back panel audio connectors. Item Description A Rear Surround B Center Channel and LFE (Subwoofer) C Line In/Side Surround/Headphones D Front Speaker/Headphones E Mic In F S/PDIF Digital Audio Out (Optical) Figure 23. Back Panel Audio Connectors NOTE The back panel line out connector is designed to power either headphones or amplified speakers only. Poor audio quality may occur if passive (non-amplified) speakers are connected to this output. 51