Intel DH61AGL Technical Product Specification - Page 18
System Memory
View all Intel DH61AGL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
Intel Desktop Board DH61AGL Technical Product Specification 1.4 System Memory The board has two SO-DIMM sockets and supports the following memory features: • 1.5 V DDR3 SDRAM SO-DIMMs with gold plated contacts, with the option to raise the voltage to support higher performance DDR3 SDRAM SO-DIMMs. • Two independent memory channels with interleaved mode support • Unbuffered, single-sided or double-sided SO-DIMMs with the following restriction: SO-DIMMs with x16 organization are not supported. • 16 GB maximum total system memory (with 4 Gb memory technology). Refer to Section 2.1.1 on page 39 for information on the total amount of addressable memory. • Minimum recommended total system memory: 1 GB • Non-ECC SO-DIMMs • Serial Presence Detect • DDR3 1600 MHz, DDR3 1333 MHz, and DDR3 1066 MHz SDRAM SO-DIMMs Note: DDR3 1600 MHz SO-DIMMs are only supported by 3rd generation Intel Core processor family processors NOTE To be fully compliant with all applicable DDR SDRAM memory specifications, the board should be populated with SO-DIMMs that support the Serial Presence Detect (SPD) data structure. This allows the BIOS to read the SPD data and program the chipset to accurately configure memory settings for optimum performance. If non-SPD memory is installed, the BIOS will attempt to correctly configure the memory settings, but performance and reliability may be impacted or the SO-DIMMs may not function under the determined frequency. Table 3 lists the supported SO-DIMM configurations. Table 3. Supported Memory Configurations Raw Card Version A SO-DIMM Capacity 1 GB 2 GB DRAM Device Technology 1 Gb 2 Gb DRAM Organization 64 M x 16 128 M x 16 # of DRAM Devices 8 8 1 GB B 2 GB 1 Gb 2 Gb 128 M x 8 8 256 M x 8 8 512 MB 1 Gb C 1 GB 2 Gb 64 M x 16 4 128 M x 16 4 2 GB 1 Gb 128 M x 8 16 F 4 GB 2 Gb 256 M x 8 16 8 GB 4 Gb 512 M x 8 16 Note: System memory configurations are based on availability and are subject to change. 18