Intel DP55SB Product Guide - Page 19
Legacy I/O, Expandability - install
UPC - 735858206006
View all Intel DP55SB manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
Desktop Board Features The six onboard SATA channels provided by the PCH support the following Intel Matrix Storage Technology RAID (Redundant Array of Independent Drives) levels: • RAID 0 - data striping • RAID 1 - data mirroring • RAID 0+1 (or RAID 10) - data striping and data mirroring • RAID 5 - distributed parity NOTE In order to use supported onboard RAID features, you must first enable RAID in the BIOS. Also, during Microsoft Windows XP installation, you must press the F6 key to install the RAID drivers. Refer to your Microsoft Windows XP documentation for more information about installing drivers during installation. Both Microsoft Windows Vista and Microsoft Windows 7 include the necessary RAID drivers for both AHCI and RAID without the need to install separate RAID drivers using the F6 key. The red eSATA connector on the back panel can be used to connect an eSATA drive. Legacy I/O Intel Desktop Board DP55SB includes an I/O controller that provides the following legacy I/O features: • Consumer Infrared (CIR) support • Low pin count (LPC) interface • Intelligent power management, including a programmable wake up event interface • PCI power management support Expandability Intel Desktop Board DP55SB provides the following expansion capability: • One PCI Express 2.0 x16 port (x8/x16 electrical) • One PCI Express 2.0 x8 port (x8 electrical; x16 compatible) • Two PCI Express 2.0 x1 ports 19