Intel DP55SB Product Guide - Page 46
Removing a PCI Express x16 Graphics Card,
UPC - 735858206006
View all Intel DP55SB manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
Intel Desktop Board DP55SB Product Guide Follow these instructions to install a PCI Express x16 graphics card: 1. Observe the precautions in "Before You Begin" on page 31. 2. Place the card in the PCI Express x16 connector (Figure 23, A) and press down on the card until it is completely seated in the connector and the card retention notch on the card snaps into place around the retention mechanism pin on the connector. 3. Secure the card's metal bracket to the chassis back panel with a screw (Figure 23, B). 4. Connect the monitor cable to the graphics card according to the manufacturer's instructions. Figure 23. Installing a PCI Express x16 Graphics Card Removing a PCI Express x16 Graphics Card Follow these instructions to remove a PCI Express x16 graphics card from a connector: 1. Observe the precautions in "Before You Begin" on page 31. 2. Remove the screw (Figure 24, A) that secures the card's metal bracket to the chassis back panel. 3. Push the card ejector lever down using the tip of a pencil or similar tool (Figure 24, B) in the notch. This will release the card from the connector (C). 4. Pull the card straight up to remove it. 46