Intel DX79TO Technical Product Specification - Page 51
Power Supply Connectors - compatible processors
View all Intel DX79TO manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
Technical Reference 2.2.2.3 Power Supply Connectors The board has the following power supply connectors: • Main power - a 2 x 12 connector. This connector is compatible with 2 x 10 connectors previously used on Intel Desktop boards. The board supports the use of ATX12V power supplies with either 2 x 10 or 2 x 12 main power cables. When using a power supply with a 2 x 10 main power cable, attach that cable on the leftmost pins of the main power connector, leaving pins 11, 12, 23, and 24 unconnected. • Processor core power - a 2 x 4 connector. This connector provides power directly to the processor voltage regulator and must always be used. Failure to do so will prevent the board from booting. Table 22. Processor Core Power Connector Pin Signal Name Pin Signal Name 1 Ground 3 Ground 5 Ground 2 +12 V 4 +12 V 6 +12 V 7 Ground 8 +12 V Table 23. Main Power Connector Pin Signal Name 1 +3.3 V Pin Signal Name 13 +3.3 V 2 +3.3 V 14 -12 V 3 Ground 15 Ground 4 +5 V 5 Ground 16 PS-ON# (power supply remote on/off) 17 Ground 6 +5 V 18 Ground 7 Ground 19 Ground 8 PWRGD (Power Good) 20 No connect 9 +5 V (Standby) 21 +5 V 10 +12 V 11 +12 V (Note) 12 2 x 12 connector detect (Note) 22 +5 V 23 +5 V (Note) 24 Ground (Note) Note: When using a 2 x 10 power supply cable, this pin will be unconnected. For information about Power supply considerations Refer to Section 2.5.1 on page 58 51