Home » Intel Manuals » Servers » Intel R2000GZ » Manual Viewer

Intel R2000GZ R2000GZ and R2000GL - Page 57

Storage Controller Options Overview, 7.1 Embedded SATA / SAS Controller support

Get Intel R2000GZ PDF manuals and user guides

View all Intel R2000GZ manuals

Add to My Manuals
Save this manual to your list of manuals

Page 57 highlights

Intel® Server System R2000GZ/GL Product Family TPS 7. Storage Controller Options Overview The server platform supports many different embedded and add-in SATA/SAS controller and SAS Expander options to provide a large number of possible storage configurations. This section will provide an overview of the different options available. 7.1 Embedded SATA / SAS Controller support Integrated on the server board is an Intel® C602 chipset that provides embedded storage support via two integrated controllers: AHCI and SCU. The standard server board (with no additional storage options installed) will support up to six SATA ports: • Two single 6 Gb/sec SATA ports routed from the AHCI controller to two white 7-pin SATA ports labeled "SATA-0" and "SATA-1" on the server board. Embedded RAID levels 0 and 1 supported. • Four 3 Gb/sec SATA ports routed from the SCU controller to the multi-port mini-SAS connector labeled "SCU_0 (0-3)". Note: The mini-SAS connector labeled "SCU_1 (4-7)" is NOT functional by default and is only enabled with the addition of an Intel® RAID C600 Upgrade Key option supporting 8 SAS/SATA ports. With the addition of one of several available Intel® RAID C600 Upgrade Keys, the system is capable of supporting additional embedded SATA, SAS, and software RAID options. Upgrade keys install onto a 4-pin connector on the server board labeled "STOR_UPG_KEY". The following table identifies available upgrade key options and their supported features. Table 22. Intel® RAID C600 Upgrade Key Options Intel® RAID C600 Upgrade Key Options (Intel Product Codes) Default - No option key installed RKSATA4R5 RKSATA8 RKSATA8R5 RKSAS4 RKSAS4R5 RKSAS8 RKSAS8R5 Key Color Description N/A Black Blue White Green Yellow Orange Purple 4 Port SATA with Intel® ESRT RAID 0,1,10 and Intel® RSTe RAID 0,1,5,10 4 Port SATA with Intel® ESRT2 RAID 0,1, 5, 10 and Intel® RSTe RAID 0,1,5,10 8 Port SATA with Intel® ESRT2 RAID 0,1, 10 and Intel® RSTe RAID 0,1,5,10 8 Port SATA with Intel® ESRT2 RAID 0,1, 5, 10 and Intel® RSTe RAID 0,1,5,10 4 Port SAS with Intel® ESRT2 RAID 0,1, 10 and Intel® RSTe RAID 0,1,10 4 Port SAS with Intel® ESRT2 RAID 0,1, 5, 10 and Intel® RSTe RAID 0,1,10 8 Port SAS with Intel® ESRT2 RAID 0,1, 10 and Intel® RSTe RAID 0,1,10 8 Port SAS with Intel® ESRT2 RAID 0,1, 5, 10 and Intel® RSTe RAID 0,1,10 Additional information for the on-board RAID features and functionality can be found in the Intel® RAID Software Users Guide (Intel Document Number D29305-015). Revision 2.0 47

Section	Page
1. Introduction	11
1.1 Chapter Outline	11
1.2 Server Board Use Disclaimer	11
1.3 Product Errata	12
2. Product Family Overview	13
2.1 Chassis Dimensions	16
2.2 System Level Environmental Limits	17
2.3 System Features and Options Overview	18
2.3.1 Hot Swap Hard Drive Bay and Front Panel Options	18
2.3.2 Back Panel Features	20
2.3.3 Front Control Panel Options	20
2.4 Server Board Features Overview	21
2.5 Available Front Bezel Support	23
2.6 Available Rack and Cabinet Mounting Kit Options	25
3. Power Subsystem	26
3.1 Mechanical Overview	26
3.2 Power Connectors	28
3.2.1 Power Supply Module Card Edge Connector	28
3.2.2 Riser Card Power Connectors	28
3.2.3 Hot Swap Backplane Power Connector	29
3.2.4 Optical Drive and SSD Power Connector	29
3.3 Power Supply Module Efficiency	30
3.4 Power Cord Specification Requirements	30
3.5 Optional Chassis Grounding Support	30
3.6 AC Power Supply Input Specifications	31
3.6.1 Power Factor	31
3.6.2 AC Input Voltage Specification	31
3.6.3 AC Line Isolation Requirements	31
3.6.4 AC Line Dropout / Holdup	31
3.6.4.1 AC Line 12VSBHoldup	32
3.6.5 AC Line Fuse	32
3.6.6 AC Inrush	32
3.6.7 AC Line Transient Specification	32
3.6.8 Susceptibility Requirements	32
3.6.9 Electrostatic Discharge Susceptibility	33
3.6.10 Fast Transient/Burst	33
3.6.11 Radiated Immunity	33
3.6.12 Surge Immunity	33
3.6.13 Power Recovery	33
3.6.14 Voltage Interruptions	33
3.6.15 Protection Circuits	33
3.6.15.1 Over-current Protection (OCP)	33
3.6.15.2 Over-voltage Protection (OVP)	34
3.6.15.3 Over-temperature Protection (OTP)	34
3.7 Cold Redundancy Support	34
3.7.1 Powering on Cold Standby supplies to maintain best efficiency	35
3.7.2 Powering on Cold Standby supplies during a fault or over current condition	35
3.7.3 BMC Requirements	35
3.7.4 Power Supply Turn On Function	35
3.8 Closed Loop System Throttling (CLST)	36
3.9 Smart Ride Through (SmaRT)	36
3.10 Power Supply Status LED	36
4. Thermal Management	37
4.1 Thermal Operation and Configuration Requirements	37
4.2 Thermal Management Overview	38
4.2.1 Set Throttling Mode	39
4.2.2 Altitude	39
4.2.3 Set Fan Profile	39
4.2.4 Fan PWM Offset	39
4.2.5 Quiet Fan Idle Mode	39
4.2.6 Thermal Sensor Input for Fan Speed Control	39
4.3 System Fans	40
4.4 Power Supply Module Fan	43
4.5 FRUSDR Utility	43
5. Intel® Xeon Phi™ Coprocessor and GPGPU Add-in Card Support	44
5.1 Using High Power Add-in Cards with Active Cooling Solutions	44
5.2 Using High Power Add-in Cards with Passive Cooling Solutions	45
5.3 Intel® Xeon Phi™ Coprocessor Card – System Configuration Requirements	46
5.4	46
6. System Storage and Peripheral Drive Bays Overview	47
6.1 2.5” Hard Disk Drive Support	47
6.1.1 2.5” Drive Hot-Swap Backplane Overview	49
6.1.2 Cypress* CY8C22545 Enclosure Management Controller	50
6.2 3.5” Hard Disk Drive Support	51
6.2.1 3.5” Drive Hot-Swap Backplane Overview	52
6.2.2 Cypress* CY8C22545 Enclosure Management Controller	53
6.3 Optical Drive Support	54
6.4 Internal – Fixed Mount Solid State Drive (SSD) Support	55
6.5 Low Profile eUSB SSD Support	56
6.6 SATA DOM Support	56
7. Storage Controller Options Overview	57
7.1 Embedded SATA / SAS Controller support	57
7.2 Embedded Software RAID Support	58
7.2.1 Intel® Embedded Server RAID Technology 2 (ESRT2)	58
7.2.2 Intel® Rapid Storage Technology (RSTe)	58
7.3 Intel® Integrated RAID Module Support (Available Option)	59
7.4 Intel® SAS Expander Support	60
7.4.1 24-Port PCIe Intel® RAID Expander Card RES2SV240	61
7.4.2 24-Port and 36-Port Internal Intel RAID Expander Cards	61
7.4.3 SAS Expander Usage Guidelines	63
7.4.4 Sample SAS Expander Configurations	63
7.4.4.1 Cable Routing using the both embedded SCU ports and a SAS Expander Card (RSTe only)	64
7.4.4.2 Cable Routing using a x8 wide-port capable 6 Gb SAS / SAS RAID Controller and an expander card	64
8. Front Control Panel and I/O Panel Overview	65
8.1 I/O Panel Features	65
8.2 Control Panel Features	65
9. Intel® Local Control Panel	69
10. PCI Riser Card Support	70
10.1 Riser Slot Overview	70
10.2 Riser Card Assembly	72
10.3 Riser Card Options	73
10.3.1 3-Slot PCIe Riser Card	73
10.3.2 2-Slot PCIe Riser Card	74
10.3.3 3-Slot PCIx / PCIe Riser Card	74
11. Mezzanine Module Support	75
11.1 IO Module Support	75
11.2 Intel® Remote Management Module 4 (RMM4) Lite and Management NIC Support	75
Appendix A: Integration and Usage Tips	77
Appendix B: POST Code Diagnostic LED Decoder	78
Appendix C: POST Code Errors	83
Appendix D: System Configuration Table for Thermal Compatibility	88
Glossary	91

Match case Limit results 1 per page

Intel

Server System R2000GZ/GL Product Family TPS

Revision 2.0

Storage Controller Options Overview

The server platform supports many different embedded and add-in SATA/SAS controller and SAS Expander

options to provide a large number of possible storage configurations. This section will provide an overview of

the different options available.

7.1

Embedded SATA / SAS Controller support

Integrated on the server board is an Intel

C602 chipset that provides embedded storage support via two

integrated controllers: AHCI and SCU.

The standard server board (with no additional storage options installed) will support up to six SATA ports:

•

Two single 6 Gb/sec SATA ports routed from the AHCI controller to two white 7-pin SATA ports labeled

“SATA-0” and “SATA-1” on the server board. Embedded RAID levels 0 and 1 supported.

•

Four 3 Gb/sec SATA ports routed from the SCU controller to the multi-port mini-SAS connector labeled

“SCU_0 (0-3)”.

Note

: The mini-SAS connector labeled “SCU_1 (4-7)” is NOT functional by default and is only enabled with the

addition of an Intel

RAID C600 Upgrade Key option supporting 8 SAS/SATA ports.

With the addition of one of several available Intel

RAID C600 Upgrade Keys, the system is capable of

supporting additional embedded SATA, SAS, and software RAID options.

Upgrade keys install onto a 4-pin

connector on the server board labeled “STOR_UPG_KEY”.

The following table identifies available upgrade key options and their supported features.

Table 22. Intel® RAID C600 Upgrade Key Options

Intel

RAID C600 Upgrade Key Options

(Intel Product Codes)

Key Color

Description

Default – No option key installed

N/A

4 Port SATA with Intel

ESRT RAID

0,1,10 and Intel

RSTe RAID 0,1,5,10

RKSATA4R5

Black

4 Port SATA with Intel

ESRT2 RAID

0,1, 5, 10 and Intel

RSTe RAID

0,1,5,10

RKSATA8

Blue

8 Port SATA with Intel® ESRT2 RAID

0,1, 10 and Intel

RSTe RAID 0,1,5,10

RKSATA8R5

White

8 Port SATA with Intel® ESRT2 RAID

0,1, 5, 10 and Intel

RSTe RAID

0,1,5,10

RKSAS4

Green

4 Port SAS with Intel® ESRT2 RAID 0,1, 10 and Intel

RSTe RAID 0,1,10

RKSAS4R5

Yellow

4 Port SAS with Intel® ESRT2 RAID 0,1, 5, 10 and Intel

RSTe RAID 0,1,10

RKSAS8

Orange

8 Port SAS with Intel® ESRT2 RAID 0,1, 10 and Intel

RSTe RAID 0,1,10

RKSAS8R5

Purple

8 Port SAS with Intel® ESRT2 RAID 0,1, 5, 10 and Intel

RSTe RAID 0,1,10

Additional information for the on-board RAID features and functionality can be found in the

Intel

RAID

Software Users Guide

(Intel Document Number D29305-015).