Intel R2000GZ R2000GZ and R2000GL - Page 82
Table 30. MRC Fatal Error Codes, 01h = Error on read DQ/DQS Data/Data Strobe init
View all Intel R2000GZ manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 82 highlights
Intel® Server System R2000GZ/GL Product Family TPS Table 30. MRC Fatal Error Codes Diagnostic LED Decoder 1 = LED On, 0 = LED Off Checkpoint Upper Nibble MSB Lower Nibble Description LSB 8h 4h 2h 1h 8h 4h 2h 1h LED #7 #6 #5 #4 #3 #2 #1 #0 MRC Fatal Error Codes E8h No usable memory error 01h = No memory was detected via SPD read, or invalid config that 1 1 1 0 1 0 0 0 causes no operable memory. 02h = Memory DIMMs on all channels of all sockets are disabled due to hardware memtest error. 3h = No memory installed. All channels are disabled. E9h 1 1 1 0 1 0 0 1 Memory is locked by Intel Trusted Execuiton Technology and is inaccessible EAh DDR3 channel training error 01h = Error on read DQ/DQS (Data/Data Strobe) init 1 1 1 0 1 0 1 0 02h = Error on Receive Enable 3h = Error on Write Leveling 04h = Error on write DQ/DQS (Data/Data Strobe EBh Memory test failure 01h = Software memtest failure. 1 1 1 0 1 0 1 1 02h = Hardware memtest failed. 03h = Hardware Memtest failure in Lockstep Channel mode requiring a channel to be disabled. This is a fatal error which requires a reset and calling MRC with a different RAS mode to retry. EDh DIMM configuration population error 01h = Different DIMM types (UDIMM, RDIMM, LRDIMM) are detected installed in the system. 1 1 1 0 1 1 0 1 02h = Violation of DIMM population rules. 03h = The 3rd DIMM slot can not be populated when QR DIMMs are installed. 04h = UDIMMs are not supported in the 3rd DIMM slot. 05h = Unsupported DIMM Voltage. EFh 1 1 1 0 1 1 1 1 Indicates a CLTT table structure error 72 Revision 2.0