Intel RMS3CC040 Hardware User Guide - Page 24
Example of the Intel, RAID Controller RS3DC080 Installation in a, PCIe Slot
View all Intel RMS3CC040 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
4. Install the RAID controller. Select a PCIe slot, and align the controller's PCIe bus connector to the slot, as shown in the following figure. Press down gently, but firmly, to make sure that the card is seated correctly in the slot. Secure the bracket to the computer chassis with the bracket screw. Note: This RAID controller is a PCIe x8 card, and it can operate in x8 or x16 slots. Some PCIe slots, however, support only PCIe graphics cards; if a RAID controller is installed in one of these slots, the RAID controller will not function. Refer to the guide for your motherboard for information about the PCIe slot. Figure 3. Example of the Intel® RAID Controller RS3DC080 Installation in a PCIe Slot Bracket Screw Press Here Press Here 3_01495-01 Edge of Motherboard PCIe Slot 17 12Gb/s Intel® RAID Controllers User Guide