Intel RMS3CC040 Hardware User Guide - Page 26

Detailed Installation for 12Gb/s Intel® RAID Modules

Get Intel RMS3CC040 PDF manuals and user guides View all Intel RMS3CC040 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 26 highlights

Detailed Installation for 12Gb/s Intel® RAID Modules This section provides detailed instructions on how to install your 12Gb/s Intel® RAID Module. The figures in this section show the installation of the Intel® RAID Module RMS3HC080 in the Mezzanine port. You can install the Intel® RAID Module RMS3CC080 in the same way. 1. Unpack the 12Gb/s Intel® RAID Module. Unpack and remove your RAID module. Inspect it for damage. If it appears damaged, contact your Intel Customer and Technical Support representative. 2. Turn off the power to the system. Turn off the power to the computer, and disconnect the AC power cord. Remove the computer cover. Refer to the system documentation for instructions. Caution: Before you install the module, make sure that the computer is disconnected from the power and from any networks. 3. Install the barrel standoff. a. Locate the matching SAS module connector on your server board. See your server board documentation. b. Insert the barrel standoffs into the matching holes in the server board. Figure 4. Install the Barrel Standoff AF006560 19 12Gb/s Intel® RAID Controllers User Guide

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
19
12Gb/s Intel® RAID Controllers User Guide
Detailed Installation for 12Gb/s Intel
®
RAID
Modules
This section provides detailed instructions on how to install your 12Gb/s Intel
®
RAID
Module.
The figures in this section show the installation of the Intel
®
RAID Module RMS3HC080
in the Mezzanine port. You can install the Intel
®
RAID Module RMS3CC080 in the same
way.
1.
Unpack the 12Gb/s Intel
®
RAID Module.
Unpack and remove your RAID module. Inspect it for damage. If it appears
damaged, contact your Intel Customer and Technical Support representative.
2.
Turn off the power to the system.
Turn off the power to the computer, and disconnect the AC power cord. Remove the
computer cover. Refer to the system documentation for instructions.
Caution:
Before you install the module, make sure that the computer is disconnected
from the power and from any networks.
3.
Install the barrel standoff.
a.
Locate the matching SAS module connector on your server board. See your
server board documentation.
b.
Insert the barrel standoffs into the matching holes in the server board.
Figure 4. Install the Barrel Standoff
AF006560