Intel RS25DB080 Hardware User Guide - Page 32
PCI Interface, LED Headers, Table 5. LED Headers Pin-out, LED Header
View all Intel RS25DB080 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
PCI Interface The Intel® RAID Controller RS25DB080 must be installed into a standard x8 or larger PCI Express* slot that complies with the PCI Express Specification, Revision 2.0. The controller is PCI Express* 1.0 compatible and is backward-compatible with x8 or larger slots that are wired with x1, x2, and x4 PCI Express* lanes. LED Headers There are 3 2-pin right angled headers present on the board and these headers are used for connection to external LED which indicate activity on any of the connected HDDs, indicate fault on any of the connected HDDs and to indicate a pending write command. Table 5. LED Headers Pin-out HDD Activity Header (J1A4) HDD Fault Header (J1A1) Write Pending Header (J1A2) Pin # Name Description Name Description Name 1 D_ACTIVE_PU 330? to GFAULT_PU 330? to P3V3_DUAL P3V3_DUAL DIRTY_PU 2 D_ACTIVE_N Connected to GFAULT Drain of onboard MFT Connected to Drain DIRTY of onboard MFT Description 330? to P3V3_DUAL Connected to Drain of onboard MFT Figure 10. LED Header 22 Intel® RAID Controller RS25DB080 Hardware User's Guide