Intel S1200BT Specification update - Page 10

Monthly Specification Update Enterprise Platforms and Services Marketing Errata 1. Bios setting is locked after running 'syscfg/bldfs' to load Bios default setting Problem The user uses "syscfg/bldfs" to load BIOS default setting, the BIOS setting is locked. Implication The user can't change the BIOS setting after the user uses "syscfg/bldfs" to load BIOS default setting on Intel® Server Board S1200BTL. Status This issue is fixed in BIOS Revision 24. Workaround The user can use CMOS clear to clear the settings and reboot the system, after that the BIOS setting can work. 2. Admin Password is cleared after loading user defaults Problem Set admin password by using syscfg command "syscfg/bap", "int123", and then load user default setting by using "syscfg/bldfs", reboot the system to enter into BIOS setup, the password is not shown. Implication After the user sets the password using the "syscfg" utility, the password does not prompt the user after the first reboot on Intel® Server Board S1200BTL. Status This issue is fixed in BIOS Revision 24. Workaround Reboot the system twice, the admin password will be shown. 3. LSI* SCSI storage card 20320 can't enter into Microsoft Windows 2008* R2 Problem Implication When using the LSI* SCSI storage card 20320, the system can't enter into Microsoft Windows 2008* R2. It hangs on the error "Info: An error occurred while attempting to read the boot configuration data". The user can't use LSI* SCSI storage card 20320 on the Intel® Server Boards S1200BTL. Status This issue is fixed in BIOS Revision 24. Workaround None. 4