Intel S5520HC Service Guide - Page 52

Devices are not Recognized under Device Manager Microsoft - compatible hard drives

Get Intel S5520HC - Server Board Motherboard PDF manuals and user guides
UPC - 735858207485
View all Intel S5520HC manuals
Add to My Manuals
Save this manual to your list of manuals

Page 52 highlights

Troubleshooting Devices are not Recognized under Device Manager (Microsoft Windows* Operating System) The Microsoft Windows* operating systems do not include all of the drivers for the Intel® chipsets, on-board NICs, and other components. See "Additional Information and Software" for a link to the current drivers and chipset files. Hard Drive(s) are not Recognized Check the following: 1. Make sure the drive is not disabled in the BIOS Setup. 2. Make sure the drive is connected correctly and plugged into the power supply. 3. Make sure the drive is compatible. See "Additional Information and Software" for a link to the tested drives. 4. Make sure you have not exceeded the power budget for the server. See "Additional Information and Software" for a link to software to check your power budget. 5. Verify your SAS or SATA drives are connected to the correct ports on the server board and the chassis backplane.See your chassis documentation for details about backplane connections. 6. If using a RAID configuration with SAS or SATA drives, make sure the RAID card is installed correctly. Bootable CD-ROM/DVD-ROM Disk Is Not Detected Check the following: „ Make sure the BIOS is configured to allow the CD-ROM to be the first bootable device. LED Information The Intel® Server Board S5520HC/S5520HCT/S5500HCV includes LEDs that can aid in troubleshooting your system. See "Intel® Light-Guided Diagnostics". BIOS POST Beep Codes The following table lists the POST error beep codes. Prior to system video initialization, the BIOS uses these beep codes to inform users of error conditions. Please note that not all error conditions are supported by the BIOS beep codes. Number of Beeps 3 Table 8. BIOS POST Error Beep Codes Reason for the Beeps and Action to Take Memory error. „ Make sure the DDR3 memory DIMMs comply with the system requirements. „ Make sure the DDR3 memory DIMMs were populated according to the system requirements. „ Remove the DDR3 memory DIMMs and re-seat them. „ Replace the DDR3 Memory DIMMs with known good modules. The Intel® Server Board S5520HC/S5520HCT/S5500HCV integrated Baseboard Management Controller (BMC) provides the following additional beep codes: 40 Intel® Server Board S5520HC, S5520HCT and S5500HCV Service Guide

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
Troubleshooting
40
Intel® Server Board S5520HC, S5520HCT and S5500HCV Service Guide
Devices are not Recognized under Device Manager (Microsoft
Windows* Operating System)
The Microsoft Windows* operating systems do not include all of the drivers for the Intel
®
chipsets, on-board
NICs, and other components. See
“Additional Information and Software”
for a link to the current drivers and
chipset files.
Hard Drive(s) are not Recognized
Check the following:
1.
Make sure the drive is not disabled in the BIOS Setup.
2.
Make sure the drive is connected correctly and plugged into the power supply.
3.
Make sure the drive is compatible. See
“Additional Information and Software”
for a link to the tested drives.
4.
Make sure you have not exceeded the power budget for the server. See
“Additional Information and
Software”
for a link to software to check your power budget.
5.
Verify your SAS or SATA drives are connected to the correct ports on the server board and the chassis
backplane.See your chassis documentation for details about backplane connections.
6.
If using a RAID configuration with SAS or SATA drives, make sure the RAID card is installed correctly.
Bootable CD-ROM/DVD-ROM Disk Is Not Detected
Check the following:
±
Make sure the BIOS is configured to allow the CD-ROM to be the first bootable device.
LED Information
The Intel
®
Server Board S5520HC/S5520HCT/S5500HCV includes LEDs that can aid in troubleshooting your
system. See
“Intel
®
Light-Guided Diagnostics”
.
BIOS POST Beep Codes
The following table lists the POST error beep codes. Prior to system video initialization, the BIOS uses these
beep codes to inform users of error conditions. Please note that not all error conditions are supported by the
BIOS beep codes.
Table 8. BIOS POST Error Beep Codes
Number of Beeps
Reason for the Beeps and Action to Take
3
Memory error.
±
Make sure the DDR3 memory DIMMs comply with the system
requirements.
±
Make sure the DDR3 memory DIMMs were populated according to the
system requirements.
±
Remove the DDR3 memory DIMMs and re-seat them.
±
Replace the DDR3 Memory DIMMs with known good modules.
The Intel
®
Server Board S5520HC/S5520HCT/S5500HCV integrated Baseboard Management Controller
(BMC) provides the following additional beep codes: