Intel S815EBM1 Quick Start Guide - Page 14

Installing the I/O Shield The server board comes with an I/O shield for use in general purpose chassis. If integrating this board in a 1U chassis, please obtain an I/O shield from the chassis vendor. When installed in the chassis, the shield blocks radio frequency transmissions, protects internal components from dust and foreign objects, and promotes correct airflow within the chassis. Install the I/O shield before installing the server board in the chassis. Place the shield inside the chassis and press the shield into place so that it fits tightly and securely. If the shield doesn't fit, obtain a properly-sized shield from the chassis supplier. .063 .005 14 [1.6 0.12] DTL M SHT 2 O.039 [1] .884 [22.45] A 0.276 [7.012] .000 [0] .465 [11.811] .567 [14.4] .787 .010 TYP [20 0.254] 6.390 REF [162.3] DTL D SHT 2 9 DTL P SHT 2 8X R0.5 MIN A .567 [14.4] .000 [0] .447 [11.345] 1.195 [30.36] 1.807 [45.892] 2.079 [52.804] 3.219 [81.768] 5.010 [127.25] Pictorial View OM12390 14 Intel Server Board S815EBM1 Quick Start Guide