Intel S815EBM1 Quick Start Guide - Page 3

Safety and Regulatory Compliance See the Intel Server Board S815EBM1 Product Guide for product Safety and EMC regulatory compliance information. Intended uses: This product was evaluated for use in servers that will be installed in offices, computer rooms, and similar locations. Other uses require further evaluation. EMC testing: Before computer integration, make sure that the chassis, power supply, and other modules have passed EMC testing using a server board with a microprocessor from the same family (or higher) and operating at the same (or higher) speed as the microprocessor used on this server board. Server board diagram label provided: Place the label inside the chassis in an easy-to-see location, preferably oriented similarly to the server board. I/O panel label provided: Place the label on the I/O shield. The cut outs are for the top serial port and the parallel port. Minimum Hardware Requirements To avoid integration difficulties and possible board damage, your system must meet the following minimum requirements. For a list of qualified memory and chassis components, as well as the latest list of supported processors see http://support.intel.com/support/motherboards/server/S815EBM1/compat.htm Processor Intel® Pentium® III processor or Intel® Celeron™ processor. ✏ NOTE While the board will electrically support all the processors listed at the URL above, the thermal solution that ships with the S815EBM1 will only function properly with processors that have an Integrated Heat Spreader (IHS). If using a non-IHS processor, you must ensure your thermal solution is designed for use with the processor. Memory The board supports 168-pin SDRAM DIMMs as defined below: • 168-pin, 3.3 V SDRAM Dual Inline Memory Modules (DIMMs) with gold-plated contacts • Unbuffered single or double row DIMMs  133 MHz SDRAM up to two double row DIMMs, or one double row DIMM and two single row DIMMs  100 MHz SDRAM up to three double row DIMMs Mixed speed DIMM configuration will default to the slowest speed DIMM installed • Serial Presence Detect (SPD) memory • Basic Non-SPD support Intel Server Board S815EBM1 Quick Start Guide 3