Intel SBCEGBESW1 CLI Guide - Page 161
Management ACL Commands, management access-list
View all Intel SBCEGBESW1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 161 highlights
Management ACL Commands 13 Management ACL Commands management access-list The management access-list Global Configuration mode command configures a management access list and enters the Management Access-list Configuration command mode. To delete an access list, use the no form of this command. Syntax management access-list name no management access-list name Parameters • name - Access list name. (Range: 1-32 characters) Default Configuration This command has no default configuration. Command Mode Global Configuration mode User Guidelines Use this command to configure a management access list. The command enters the Access-list Configuration mode, where permit and deny access rules are defined using the permit (Management) and deny (Management) commands. If no match criteria are defined, the default is deny. If you reenter an access list context, the new rules are entered at the end of the access list. Use the management access-class command to select the active access list. The active management list cannot be updated or removed. Management ACL requires a valid management interface, which is a port, VLAN, or portchannnel with an IP address or console interface. Management ACL only restricts access to the device for management configuration or viewing. Intel® Blade Server Ethernet Switch Modules SBCEGBESW1 and SBCEGBESW10 CLI Guide 145