Intel SBCEGBESW1 CLI Guide - Page 78
sntp client enable (Interface
View all Intel SBCEGBESW1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 78 highlights
Clock Commands Example The following example enables SNTP anycast clients. console(config)# sntp anycast client enable sntp client enable (Interface) The sntp client enable Interface Configuration (Ethernet, port-channel, VLAN) mode command enables the Simple Network Time Protocol (SNTP) client on an interface. This applies to both receive broadcast and anycast updates. To disable the SNTP client, use the no form of this command. Syntax sntp client enable no sntp client enable Default Configuration The SNTP client is disabled on an interface. Command Mode Interface Configuration (Ethernet, port-channel, VLAN) mode User Guidelines Use the sntp broadcast client enable Global Configuration mode command to enable broadcast clients globally. Use the sntp anycast client enable Global Configuration mode command to enable anycast clients globally. Example The following example enables the SNTP client on Ethernet port 3. Console(config)# interface ethernet ext.3 Console(config-if)# sntp client enable 62 Intel® Blade Server Ethernet Switch Modules SBCEGBESW1 and SBCEGBESW10 CLI Guide