Intel SBCEGBESW1 User Guide - Page 25
Installing and Removing the Intel® Blade Server Ethernet Switch Module SBCEGBESW1/ SBCEGBESW10
View all Intel SBCEGBESW1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
2 Installing and Removing the Intel® Blade Server Ethernet Switch Module SBCEGBESW1/ SBCEGBESW10 Overview The process of installing an Intel® Blade Server Ethernet Switch Module SBCEGBESW1/SBCEGBESW10 into an Intel® Blade Server Chassis SBCE consists of both hardware and software instructions. There are two main tasks: • Physically installing the switch module into the Intel® Blade Server Chassis SBCE. • Configuring the switch module. The initial configuration process consists of setting the user name and password, configuring the static IP address, and configuring the SNMP read/write access and community strings. After the IP address is set, the switch module can be managed through the network via Telnet, SNMP, or Web interfaces. Package Contents While unpacking the switch module, ensure that the following items are included: • The switch module • Resource CD • Safety and Regulatory Information Document Unpacking the Switch Module To unpack the switch module: Note: Before unpacking the switch module, inspect the packaging and report any evidence of damage immediately to Intel. Note: An ESD strap is not provided; however, it is recommended to wear one for the following procedure. 1. Open the container. Intel® Blade Server Ethernet Switch Modules SBCEGBESW1 and SBCEGBESW10 EWS User Guide 9