Intel SC5600BRP Service Guide - Page 32

Removing and Installing the Air Duct

Get Intel SC5600BRP PDF manuals and user guides View all Intel SC5600BRP manuals
Add to My Manuals
Save this manual to your list of manuals

Page 32 highlights

Hardware Installations and Upgrades 4. Fit the right edge of the bezel assembly against the right side of the chassis. 5. Engage the plastic bezel hooks (see letter "D") into the raised metal slots at the chassis edge. 6. Rotate the bezel assembly toward the chassis. 7. Latch the two plastic tabs (see letter "E") on the left side of the bezel assembly to the chassis. Figure 11. Installing the Front Bezel Removing and Installing the Air Duct Always operate your server chassis with the air duct in place. The air duct is required for proper airflow within the chassis. For instructions on adding or replacing a processor, first remove the air duct, and then see your server board user guide for instructions on processor installations and removals. Return to these instructions to reinstall the air duct after installing your processor and heat sink. Removing the Air Duct 1. Observe the safety and ESD precautions at the beginning of this book. See "Appendix B: Safety Information". 2. Power down the server and unplug all peripheral devices and the AC power cable. 3. Remove the chassis cover. For instructions, see "Removing the Chassis Cover" on page 26. 18 Intel® Server Chassis SC5600 Service Guide

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
Hardware Installations and Upgrades
18
Intel®
Server Chassis SC5600 Service Guide
4.
Fit the right edge of the bezel assembly against the right side of the chassis.
5.
Engage the plastic bezel hooks (see letter “D”) into the raised metal slots at the chassis edge.
6.
Rotate the bezel assembly toward the chassis.
7.
Latch the two plastic tabs (see letter “E”) on the left side of the bezel assembly to the chassis.
Figure 11. Installing the Front Bezel
Removing and Installing the Air Duct
Always operate your server chassis with the air duct in place. The air duct is required for proper airflow within
the chassis.
For instructions on adding or replacing a processor, first remove the air duct, and then see your server board
user guide for instructions on processor installations and removals. Return to these instructions to reinstall the
air duct after installing your processor and heat sink.
Removing the Air Duct
1.
Observe the safety and ESD precautions at the beginning of this book. See “Appendix B: Safety
Information”.
2.
Power down the server and unplug all peripheral devices and the AC power cable.
3.
Remove the chassis cover. For instructions, see “Removing the Chassis Cover” on page 26.