Intel SC5600BRP Service Guide - Page 62
Replacing a Hot Swap Power Supply
View all Intel SC5600BRP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 62 highlights
Hardware Installations and Upgrades Replacing a Hot Swap Power Supply WARNING Hazardous voltage, current, and energy levels are present inside the power supply. There are no user-serviceable parts inside it; servicing should be done by technically qualified personnel only. 1. Remove the power cable from the defective hot swap power supply. 2. Press on the green latch on the power supply (see letter "A" in Figure 53) while pulling on the handle (see letter "B" in Figure 53) to remove the power supply from the chassis. Figure 53. Removing Hot Swap Power Supply from Chassis 3. Push the handle (see letter "A" in Figure 54) to insert the new hot swap power supply into the chassis, and make sure the green latch (see letter "B" in Figure 54) secures the hot swap power supply to the power supply cage. Figure 54. Installing Hot Swap Power Supply into Chassis 4. Connect the power cable to the replaced power supply. 48 Intel® Server Chassis SC5600 Service Guide