Intel SR1530CL User Guide - Page 47

3 Hardware Installations and Upgrades Caution: No components in this server system are hot-swappable. Before removing or installing any component in this server system, you must first take the server out of service, turn off all peripheral devices connected to the system, turn off the system by pressing the power button, and unplug the AC power cord from the system or wall outlet. Note: Some components in the Intel® Server System SR1530HCL / SR1530HCLS and Intel® Server System SR1530HCLR / SR1530HCLSR are hot-swappable and, where applicable, will be noted as such in the instructions. Note: Most of the illustrations in this chaper show the Intel® Server System SR1530CL / SR1530CLR with an optional optical drive installed. The instructions for removing and installing components are the same for the Intel® Server System SR1530HCL / SR1530HCLS and the ntel® Server System SR1530HCLR / SR1530HCLSR unless otherwise noted. When instructions differ, separate illustrations will be shown for the Intel® Server System SR1530HCL / SR1530HCLS and the ntel® Server System SR1530HCLR / SR1530HCLSR. Before You Begin Before working with your server product, pay close attention to the "Safety Information" on page iii. Tools and Supplies Needed • Phillips* (cross head) screwdriver (#1 bit and #2 bit) • Needle nosed pliers • Antistatic wrist strap and conductive foam pad (recommended) System References All references to left, right, front, top, and bottom assume the reader is facing the front of the server system as it would be positioned for normal operation. Server System User Guide 25