Intel SRCU42E Hardware User Guide - Page 24
RAID Controller SRCU42E number, firmware
UPC - 735858168403
View all Intel SRCU42E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
Figure 2.3 Terminating an Internal SCSI Disk Array Terminator ID2 - No Termination ID1 - No Termination ID0 - Boot Drive No Termination Host Computer Intel RAID Controller SRCU42E SCSI ID 7 9) Power On Host System Replace the computer cover, and reconnect the AC power cords. Turn power on to the host computer. Ensure that the SCSI devices are powered up at the same time as, or before, the host computer. If the computer is powered up before a SCSI device, the device might not be recognized. During boot, a BIOS message appears. The firmware takes several seconds to initialize. During this time, the RAID Controller SRCU42E scans the SCSI channel(s). The BIOS Configuration utility prompt times out after several seconds. The second portion of the BIOS message displays the Intel® RAID Controller SRCU42E number, firmware version, and cache SDRAM size. The numbering of the controllers follows the PCI slot scanning order used by the host system board. Press to run BIOS Console Detailed Installation 24