Intel SRCU42E Hardware User Guide - Page 28

3.2 Intel® RAID Controller SRCU42E Characteristics Table 3-2 shows the general characteristics for the RAID Controller SRCU42E . Table 3-2 Intel® RAID Controller SRCU42E Characteristics Flash Serial LVD/SE ROM1 EEPROM Signaling Ultra320 SCSI Data Transfers Yes Yes 16-bit SE Up to 320 Mbytes/s as well or LVD as Fast, Ultra, Ultra2, and interfaces Ultra160 speeds; Synchronous offsets up to 62. 1. For boot code and firmware SCSI Features SCSI Termination Plug n Play Active: Single Scatter/Gather Ended or LVD Activity LED 3.3 Technical Specifications The design and implementation of the RAID Controller SRCU42E minimizes electromagnetic emissions, susceptibility to radio frequency energy, and the effects of electrostatic discharge. The RAID Controller SRCU42E carries the CE mark, C-Tick mark, FCC Self-Certification logo, Canadian Compliance Statement, Korean MIC, Taiwan BSMI, and Japan VCCI, and they meet the requirements of CISPR Class B. 3.3.1 RAID Controller Specifications Table 3-3 lists the specifications for the RAID Controller SRCU42E . Table 3-3 Intel® RAID Controller SRCU42E Specifications Specification Description Processor (PCI Controller) Intel® 80332 I/O processor @ 500 MHz Operating Voltage 3.3 V, +12 V Card Size Half-length PCI RAID controller size (6.875" X 4.2") Array Interface to Host x8 PCI Express* PCI Bus Data Transfer Rate x8 PCI Express host data transfer rate Serial Port 3-pin RS232C-compatible connector (for manufacturing use only) SCSI Controller(s) One LSI* 53C1030 Dual SCSI controller SCSI Connectors Two 68-pin internal high-density connectors for SCSI devices. Two very high-density 68-pin external connectors for Ultra320 and Wide SCSI. SCSI Bus Termination Active: single-ended or LVD Termination Disable Automatic through cable and device detection Intel® RAID Controller SRCU42E Characteristics 28