Intel TIGPT1U Product Specification - Page 35
Exteranly-Accessible Interconnects
UPC - 735858166249
View all Intel TIGPT1U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
Intel® Carrier Grade Server TIGPT1U TPS Cables and Connectors CDROM I/F P1 CDROM I/F P3 NEBS Rsr J1A1 CDROM Interface Board Connections 2 x 1 Power Connector CDROM Pwr Cb P1 2 x 20 IDE Connector IDE Cable P3 NEBS Riser Board Connections 1 x 3 Power Connector P/S CDRsr Cb J1A1 2 x 1 Power Connector 2 x 20 IDE Connector 1 x 3 Power Connector 3.4 Exteranly-Accessible Interconnects 3.4.1 Keyboard and Mouse Ports PS/2 keyboard and mouse connectors are located on the back panel. The +5 V lines to these connectors are protected with a PolySwitch* circuit that, like a self-healing fuse, reestablishes the connection after an overcurrent condition is removed. ✏ NOTE The keyboard is supported in the bottom PS/2 connector and the mouse is supported in the top PS/2 connector. Power to the server should be turned off before a keyboard or mouse is connected or disconnected. The keyboard controller contains the AMI keyboard and mouse controller code, provides the keyboard and mouse control functions, and supports password protection for power-on/reset. A power-on/reset password can be specified in the BIOS Setup program. Table 3-2. Keyboard/Mouse PS/2 Connector Pin Out (J9A1) Connector Keyboard Mouse Pin Signal Name 1 Data 2 NC 3 GND 4 +5 V (Fused) 5 Clock 6 NC 7 Data 8 NC 9 GND 10 +5 V (Fused) 11 Clock 12 NC 13 NC 14 NC 15 NC 16 NC 17 NC Revision 1.0 25