Intermec PM4i Intermec Direct Protocol 8.60 Programmer's Reference Manual - Page 28
Insertion Point, Alignment, Intermec Fingerprint v.8.60, Programmer's Reference Manual - reset
View all Intermec PM4i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
Chapter 3-Label Design Insertion Point The insertion point of any printable object is specified within the coordinate system using PRPOS (PP). The coordinates must be selected so the field fits completely inside the printable area. PRPOS | PP , Default value: Reset to default by: is the distance in dots along the x-axis from origin to insertion point is the distance in dots along the y-axis from origin to insertion point PRPOS 0,0 PRINTFEED (PF) Example: PP 100, 200 ↵ Alignment Once the insertion point is specified, you must also decide which part of the object should match the insertion point. For example, a text field forms a rectangle. There are 8 anchor points along the borders and one in the center, numbered 1-9 and specified using the instruction ALIGN: ALIGN | AN Default value: Reset to default by: is a number 1-9 1 PRINTFEED (PF) Example: AN 1 ↵ This instruction will place the lower left corner of the text field at the insertion point specified by PRPOS. Refer to the illustration below, and to the Intermec Fingerprint v.8.60, Programmer's Reference Manual; ALIGN statement, for detailed information on the anchor points for various types of printable objects. 20 Intermec Direct Protocol v.8.60-Programmer's Reference Manual