Intermec PM4i Intermec Direct Protocol 8.60 Programmer's Reference Manual - Page 35
Summary, PP 200, 500:AN 7:DIR 2:FT Swiss 721 BT, 18:II
View all Intermec PM4i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
Chapter 3-Label Design Summary To create a text field, the following formatting instructions must be given (in most cases default values may substitute missing parameters). Input data to the field and printing instructions are explained in Chapters 3.9 and 4.2 respectively. Purpose Instruction Default Remarks X/Y Position PP (PRPOS) 0/0 Number of dots Alignment AN (ALIGN) 1 Select AN 1-9 Direction DIR 1 Select DIR 1-4 Font FT (FONT) Swiss 721 BT, 12,0,100 [Magnification MAG 1,1 Height 1-4, Width 1-4] Appearance II (INVIMAGE) off NI (NORIMAGE ) on White-on-black print Black-on-white print Example: PP 200,500:AN 7:DIR 2:FT "Swiss 721 BT",18:II ↵ Intermec Direct Protocol v.8.60-Programmer's Reference Manual 27
Intermec Direct Protocol v.8.60—Programmer’s Reference Manual
27
Chapter 3—Label Design
Summary
To create a text field, the following formatting instructions must be given
(in most cases default values may substitute missing parameters). Input
data to the field and printing instructions are explained in Chapters 3.9
and 4.2 respectively.
Purpose
Instruction
Default
Remarks
X/Y Position
PP (PRPOS)
0/0
Number of dots
Alignment
AN (ALIGN)
1
Select AN 1-9
Direction
DIR
1
Select DIR 1-4
Font
FT (FONT)
Swiss 721 BT, 12,0,100
[Magnification MAG
1,1
Height 1-4, Width 1-4]
Appearance
II (INVIMAGE)
off
White-on-black print
NI (NORIMAGE ) on
Black-on-white print
Example:
PP 200,500:AN 7:DIR 2:FT "Swiss 721 BT",18:II
↵