Intermec PX4i EasyCoder Printer (PX4i and PX6i) RFID Kit Installation Instruct - Page 3

What Is the RFID Kit? The RFID kit provides RFID functionality for the EasyCoder® PX4i and PX6i printers. With this kit installed, the PX4i or PX6i printer can read and write to RFID tags. These instructions describe how to install these RFID kits: • PX4i 915 MHz RFID Kit (P/N 270-153-001) • PX4i 869 MHz RFID Kit (P/N 270-155-001) • PX6i 915 MHz RFID Kit (P/N 270-154-001) • PX6i 869 MHz RFID Kit (P/N 270-156-001) For more information about using RFID features on the PX4i or PX6i, see the EasyCoder Printer RFID User's Guide (P/N 934-041-xxx). What You Get • One of these I/O interface boards: • I/O interface board with IM4 869 MHz radio module • I/O interface board with IM4 915 MHz radio module • One of these lower media guides: • PX4i lower media guide with RFID antenna • PX6i lower media guide with RFID antenna • Dual slot I/O cable • M3x5 screw (2) • M4x5 screw • Spacer screw What You Need • A PX4i or PX6i printer running Fingerprint v8.76.0 or later or IPL v2.76.0 or later. You can download the latest version of firmware from the Intermec web site at www.intermec.com. • A #T10 and a #T20 Torx screwdriver. • A slotted screwdriver. EasyCoder Printer (PX4i and PX6i) RFID Kit Installation Instructions 3