Intermec i.roc User Manual - Page 8

Use the following table to understand the Intermec Power Options.  Note: The Real Time Clock (RTC) will persist through all of the power options as long as it receives power from the Real Time Clock battery. Intermec Power Options Option Description Suspend Medium power saving mode. The computer powers off all radios and internal devices not involved in saving the system state, but the phone stays on to receive calls. This option is the default setting. You can wake the computer by pressing the Power button, pulling the scanner trigger, receiving a call, scheduling an event such as an alarm, or by connecting external power. Reboot Cancel The computer does not save the current system state, but the registry and file systems are saved. The computer shuts down all running processes and restarts. The Power Options menu is cancelled. Screen Off Shutdown Lowest power saving mode. The screen turns off, but the phone, all radios, and internal devices stay on. Tap the screen to turn the screen back on. Very high power saving mode. The computer turns off everything. You must press Power or apply external power to restart the computer. The Power Options screen is customizable. You can use Intermec Settings to determine which options are available to end users, the timeout until the default choice is selected, the default action if no option is selected, or to disable the Power Options screen. For more information on customizing the screen using ecom instruments Settings, see "Use Intermec Settings on the Computer" or see the Intermec Settings Command Reference Manual. About the Intermec Dashboard Button If the Ready-to-Work light blinks, your computer may be experiencing a problem. Press the Intermec Dashboard button (m) to launch the Intermec Dashboard application and view troubleshooting and status information. You can press the m button at any time to bring up the Intermec Dashboard. If the computer is not healthy, the current issues are displayed at the top of the screen. If the device is healthy, you can use the Dashboard to view device information. For more information, see "About the Intermec Dashboard". Configure the Screen Backlight The display has an ambient light sensor that automatically adjusts the backlight intensity to conserve power and ensure the display is readable. By default, the screen turns off when there is no activity with the computer. Press a key or tap the screen to resume activity. 14 You can configure the screen backlight to turn off. 1 Tap Start > Settings > Power. 2 Tap Advanced on the horizontal scroll bar. 3 Select the screen power off settings for when the computer is on battery power or external power. You can configure the screen brightness using Intermec Settings or from the Start menu. 1 Tap Start > Settings > System > Backlight. 2 Adjust the slider to the desired brightness level. 3 Tap OK. Adjust the Volume You can adjust the computer volume for your needs and your environment. The volume includes sounds you hear when you tap the screen or read bar codes with the imager. You can set the volume to off, very low, low, medium, high or very high (default). You can also use the buttons on the right side of the computer to adjust the volume: • The upper button increases the volume. • The lower button decreases the volume. You can adjust the volume settings using Intermec Settings or the horizontal scroll menu. 1 Tap the Volume icon at the top of the screen, and then tap the volume icon on the horizontal scroll menu. 2 Use your stylus or the u and d keys to adjust the volume slider to the volume you want, or select Off. Insert a microSD Card You can use a microSD™ card to increase file storage and install software. The computers support an optional 32 GB maximum capacity microSD card.  Note: The computer resets when you open the card access door to insert the microSD card. Make sure you completely close the card access door before you use your computer. ecom instruments recommends using the following microSD cards: Card Type ATP Industrial Grade microSD card ATP Industrial Grade microSD card ATP Industrial Grade microSD card ATP Industrial Grade microSD card Card Size 1 GB 2 GB 4 GB 8 GB ecom Part Number A0003477 A0003478 A0030305 A0030306 Install a microSD card in a i.roc® Ci70 -Ex 1 Press the Power button to turn off the computer. 2 Remove the handstrap and the battery. 3 Remove the four Phillips screws and open the card access door. 15