Invacare 7714P Owners Manual - Page 3
Storing the Floor Base - beds
View all Invacare 7714P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 3 highlights
Wing Nut Floor Base Tubular Hook Offset Bar Trapeze Key Bed End INCORRECT MOUNTING Upper Bed Bracket Top Rail Lower Bed Bracket Socket Wing Nut Chain Links Clamp Grab Bar "S" Hook Bottom Rail Floor Base Tubular Hook (Facing Down) Top Rail Upper Bed Bracket Wing Nut Lower Bed Bracket Wing Nut Socket Drive Shaft Tubular Hook (Facing Up) CORRECT MOUNTING Offset Bar Tubular Hook Bed Frame FIGURE 2 Attaching Trapeze to Floor Base/Bed End/Adjusting the Grab Bar Storing the Floor Base NOTE: For this procedure, refer to FIGURE 3. 1. Remove the trapeze from the floor base. 2. Depress one (1) snap button on floor leg assembly and lift UP on the ʺAʺ frame until the snap button clears the top of the floor leg assembly. 3. Rotate one (1) leg of the floor base assembly 270° clockwise away from the other leg. 4. Rotate the remaining leg of the floor base assembly 90° clockwise towards the other leg. "A" Frame Floor Base Assembly STEP 3 Snap Button Floor Base Assembly STEP 4 FIGURE 3 Storing the Floor Base Part No 1013153 3 Floor Base and Fixed Trapeze