Invacare FDX Owners Manual 3 - Page 38
Installing/Removing Footrests
View all Invacare FDX manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
5 USAGE 5.4 About Front Riggings ƽ WARNING While the wheelchair is moving, minimum ground clearance for the front rigging is three inches. If the wheelchair is not moving, the front rigging MUST maintain a minimum of one inch ground clearance - otherwise personal injury and damage may result. DO NOT stand on the flip-up footboard. When getting in or out of the wheelchair, make sure that the flip-up footboard is in the upward position. PINCH POINT EXISTS BETWEEN CENTER MOUNT FOOTREST AND CASTERS - There is limited clearance between center mount footrest and casters. The user's feet MUST remain on the center mount footrest while operating the wheelchair. If the user's feet are allowed to rest off the side of the center mount footrest they may come in contact with the caster possibly resulting in injury. Installing/Removing Footrests Footrest Release Lever PH904A, PHAL4A, 70° and PW93 1. Turn the footrest to the side (open footplate is perpendicular to wheelchair). 2. Install the hinge plates on the footrest onto the hinge pins on the wheelchair frame. 3. Push the footrest towards the inside of the wheelchair until it locks into place. The footplate will be on the inside of the wheelchair when locked in place. 4. Repeat STEPS 1-3 for other footrest assembly. 5. To remove the footrest, push the footrest release lever inward, rotate footrest outward. 6. Adjust footrest height, if desired. Refer to Footrest Height Adjustment on page 51. Hinge Pins Hinge Plate Footrest FIGURE 4 Installing/Removing Footrests - Ph904A, Phal4A, 70° and pw93 Invacare® Adjustable ASBA Seats 38 Part No 1143192