Invacare FDX Owners Manual 3 - Page 53
° Taper
View all Invacare FDX manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
6 ADJUSTMENT 70° Taper 1. Remove any accessory from the footrest(s). 2. Remove the footrest from the wheelchair. Refer to Installing/Removing Footrests on page 38. Lay the assembly on a flat surface to improve access to the hardware. Note the position of the spacers before disassembly. 3. Remove the mounting screw and coved spacer that secures the lower footrest assembly. 4. Position the footrest assembly to the desired height. 5. Secure lower footrest assembly with existing mounting screw and coved spacer. Securely tighten. Coved Spacer Mounting Screw Make sure spacers are positioned properly when reassembling to prevent damage to the frame mounting tubes. 6. Reinstall the footrest(s) onto the wheelchair. Refer to Installing/ Removing Footrests on page 38. 7. Reinstall any accessory onto the footrest(s). Heel Loop Footrest FIGURE 3 Footrest Height Adjustment - 70° Taper Part No 1143192 53 Invacare® Adjustable ASBA Seats