Invacare FDX Owners Manual 3 - Page 76
Adjusting Headrest Depth/Direction, Replacing Headrest
View all Invacare FDX manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 76 highlights
7 SETUP/MAINTENANCE Adjusting Headrest Depth/Direction For this procedure, refer to FIGURE 10 on page 75. 1. Loosen, but DO NOT remove, the three socket screws that secure the offset fixture to the slide tube. 2. If necessary, reposition the headrest to the desired depth by sliding the headrest towards the front of the wheelchair or towards the rear of the wheelchair. 3. If necessary, reposition the headrest to the desired position (headrest will move in any direction). 4. While holding the headrest in the desired position, securely tighten the three socket screws. 5. If necessary, adjust the height of the headrest. Refer to Adjusting Headrest Height on page 75. 7.13 Replacing Headrest 1. Remove the three socket screws that secure the headrest to the headrest mounting bracket. 2. Position the new headrest on the headrest mounting bracket and secure with the existing three socket screws. 3. If necessary, adjust the height, depth or direction of the headrest. Refer to Adjusting Headrest Height or Adjusting Headrest Depth/Direction on page 76. One style of headrest shown for clarity. Both styles of headrest attach the same way. Headrest Mounting Bracket Socket Screw Headrest Invacare® Adjustable ASBA Seats FIGURE 11 Replacing Headrest 76 Part No 1143192