Invacare R51LXP Owners Manual - Page 23

SECTION 4-SAFETY INSPECTION/TROUBLESHOOTING Inspect/Adjust Weekly ❑ Inspect tires for flat spots and wear. ❑ Ensure that casters are free of debris. Inspect/Adjust Monthly ❑ Ensure arm pivot points are free of wear and looseness. ❑ Ensure wheel mounting bolts are secure on drive wheels. ❑ Ensure no excessive side movement or binding when drive wheels are lifted and spun when disengaged (free-wheeling). ❑ Ensure wheel/fork assembly has proper tension when caster is spun. Caster should come to a gradual stop. CAUTION As with any vehicle, wheels and tires should be checked periodically for cracks and wear and should be replaced as necessary. ❑ Loosen/tighten caster locknut if wheel wobbles noticeably or binds to a stop. ❑ Ensure all caster/wheel/fork/headtube fasteners are secure. ❑ Inspect for any loose hardware on the wheelchair. ❑ Inspect seat positioning strap for any signs of wear. Ensure buckle latches. Verify hardware that attaches strap to frame is secure and undamaged. Replace if necessary. ❑ Ensure that casters are free of debris. Inspect/Adjust Periodically ❑ Ensure wheelchair rolls straight (no excessive drag or pull to one side). ❑ Ensure arms are secure but easy to release and adjustment levers engage properly. ❑ Ensure adjustable height arms operate and lock securely. ❑ Ensure armrest pads sit flush against arm tubes. ❑ Inspect seat and back upholstery for rips or sagging. ❑ Ensure seat release latch is not worn. Replace if necessary. ❑ Clean upholstery and armrests. ❑ Inspect charger AC power cord for damage. Replace if necessary. ❑ Check that all labels are present and legible. Replace if necessary. ❑ Ensure that casters are free of debris. ❑ Inspect electrical componenets for signs of corrosion. Replace if corroded or damaged. Part No. 1106645 23 R51™and R51LXP