Invacare RPS350-1 Owners Manual - Page 16
Moving the Patient
View all Invacare RPS350-1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
SECTION 4-LIFTING THE PATIENT ƽ WARNING If transferring a patient from a wheelchair, the wheelchair wheel locks MUST be in the locked position before lowering the patient into the wheelchair. Otherwise, injury may occur. 4. If transferring from a wheelchair, lock the wheel locks on the wheelchair (Detail "B" of FIGURE 4.2). 5. Press the UP arrow button on the hand control to raise the patient above the surface (bed, wheelchair or commode). NOTE: The patient's weight will be supported by the stand up lift. NOTE: The lower center of gravity provides stability making the patient feel more secure and the lift easier to move. Mast Handle Handgrip Knee Pad DETAIL "A" - WHEEL LOCK Wheel Lock Casters Moving the Patient Foot Plate FIGURE 4.2 Lifting the Patient ƽ WARNING The legs of the stand up lift MUST be in the maximum open position for optimum stability and safety. If the patient is in a sling and it becomes necessary to move through a narrow passage, close the legs of the stand up lift only as long as it takes to move through the passage. When the stand up lift is through the passage, return the legs to the maximum open position. DO NOT, during transfer of a patient suspended in the lift sling, roll caster base over uneven surfaces that would create an imbalance of the lift. This could cause the lift to tip over. Use the mast handle at all times to push or pull the lift. 1. Ensure the legs of the stand up lift are in the maximum open position. If not, use the shifter handle to open the legs. 2. Move the stand up lift away from the surface they were lifted from. 3. Slowly move the patient to the desired surface. Stand Up Patient Lift 16 Part No. 1078984