Invacare SOLARA3GLS1 Owners Manual - Page 95

Operating Hublocks, Patient Operated Hublock

Page 95 highlights

13 WHEEL LOCKS/ANTI-TIPPERS ƽ WARNING After any adjustments, repair or service and before use, make sure all attaching hardware is tightened securely - otherwise injury or damage may occur. ALWAYS engage both hublocks and reduce the gap distance before transferring to and from the wheelchair. Turn all casters parallel to the object you are transferring onto. Hublocks are not brakes. DO NOT attempt to stop a moving wheelchair with the hublocks. Users should be evaluated by a care provider to determine the suitability of the hub lock option. Repetitive uncontrolled motion or spasms can result in damage to the hub lock system Engaging the hublocks may not prevent the wheelchair from moving on all floor surfaces including those that may be wet or slick. ALWAYS exercise caution when transferring into or out of your wheelchair. Always keep hands and fingers clear of moving parts to avoid injury. DO NOT sit or transfer into the wheelchair unless it is fully open and the seat frame rails are fully seated into the side frame H-blocks 13.3 Operating Hublocks  If hublocks do not engage properly (wheels move while hublocks are locked) or do not disengage properly contact a qualified technician. Patient Operated Hublock 1. Perform one of the following: • Engaging the Hublocks - Push hublock lever down to engage the hublocks • Disengaging the Hublocks - Pull hublock lever up to disengage the hublocks. Part No 1154295 95 Invacare® Solara®3G/Spree 3G Wheelchair

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124

13
WHEEL LOCKS/ANTI-TIPPERS
Part No 1154295
95
Invacare® Solara®3G/Spree 3G Wheelchair
13.3
Operating Hublocks
Patient Operated Hublock
1.
Perform one of the following:
Engaging the Hublocks - Push hublock lever down to engage the hublocks
Disengaging the Hublocks - Pull hublock lever up to disengage the hublocks.
±
WARNING
After any adjustments, repair or service and before use, make sure all attaching hardware is tightened securely - otherwise
injury or damage may occur.
ALWAYS engage both hublocks and reduce the gap distance before transferring to and from the wheelchair. Turn all
casters parallel to the object you are transferring onto.
Hublocks are not brakes. DO NOT attempt to stop a moving wheelchair with the hublocks.
Users should be evaluated by a care provider to determine the suitability of the hub lock option. Repetitive uncontrolled
motion or spasms can result in damage to the hub lock system
Engaging the hublocks may not prevent the wheelchair from moving on all floor surfaces including those that may be wet or
slick. ALWAYS exercise caution when transferring into or out of your wheelchair.
Always keep hands and fingers clear of moving parts to avoid injury.
DO NOT sit or transfer into the wheelchair unless it is fully open and the seat frame rails are fully seated into the side
frame H-blocks
If hublocks do not engage properly (wheels move while hublocks are locked) or do not disengage properly contact a
qualified technician.