Invacare TDXSP2 Owners Manual 4 - Page 42
Disengaging/Engaging the Wheel locks
View all Invacare TDXSP2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
Invacare® TDX® SP2 Series 1. Turn off the wheelchair power. 2. Perform one of the following as if viewing the motors from behind the wheelchair (Detail "A"): • Disengage (PUSH) - Move the motor lock levers UP to disengage the motors and push the wheelchair. • Engage (DRIVE) - Move the motor lock levers DOWN to engage the motors and drive the wheelchair. 6.3 Disengaging/Engaging the Wheel locks WARNING! Risk of Injury or Damage Misuse of wheel locks may result in injury or damage. - DO NOT attempt to stop a moving wheelchair with the wheel locks. Wheel locks are not brakes. - DO NOT use the wheel locks (if equipped) when the wheelchair power is on. Invacare recommends the use of wheel locks. Use the wheel locks to hold the wheelchair in place whenever the clutches are disengaged. Fig. 6-3 6.3.1 Engaging 1. Push handle A forward C away from tire B to engage wheel lock D. 2. Repeat STEP 1 for opposite wheel. 6.3.2 Disengaging 1. Pull handle A back E toward tire B to disengage wheel lock D. 2. Repeat STEP 1 for opposite wheel. 42 60101831-A