Invacare TRSX5RC Owners Manual - Page 22

SAFETY, Invacare, Tracer, SX5 Wheelchair, Part No. 1110550

Get Invacare TRSX5RC PDF manuals and user guides View all Invacare TRSX5RC manuals
Add to My Manuals
Save this manual to your list of manuals

Page 22 highlights

2 SAFETY Folding/Unfolding the Wheelchair Unfolding the Wheelchair 1. Tilt the wheelchair toward you (raising the opposite wheel and caster off the ground/floor). 2. Place your hand on the top of the seat rail closest to you where the seat upholstery is attached. 3. Point your fingers and thumb to the inside of the wheelchair. 4. Press downward on the top of the seat rail until the wheelchair is fully open and the seat rails are fully seated in the H-blocks. 5. Tracer SX5 RECLINERS ONLY - Install spreader bar. Refer to Removing/Installing the spreader bar in section 10 of this manual. 6. Engage both wheel locks, 7. open the footrest/legrest for clearance and transfer into the wheelchair. Refer to Transferring To and From Other Seats on page 21. H-Blocks Seat Rail  DO NOT wrap thumb or fingers under the seat rail. Point fingers and thumb to the inside of the wheelchair.  Press down on the seat rail and the seat upholstery with the entire hand. DO NOT place any part of the hand under the seat rail. FIGURE 6 Folding/Unfolding the Wheelchair Invacare® Tracer® SX5 Wheelchair 22 Part No. 1110550

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
2
SAFETY
Invacare
®
Tracer
®
SX5 Wheelchair
22
Part No. 1110550
Folding/Unfolding the Wheelchair
Unfolding the Wheelchair
1.
Tilt the wheelchair toward you (raising the opposite wheel and caster off the ground/floor).
2.
Place your hand on the top of the seat rail closest to you where the seat upholstery is attached.
3.
Point your fingers and thumb to the inside of the wheelchair.
4.
Press downward on the top of the seat rail until the wheelchair is fully open and the seat rails are fully seated in the H-blocks.
5.
Tracer SX5 RECLINERS ONLY - Install spreader bar. Refer to Removing/Installing the spreader bar in section 10 of this manual.
6.
Engage both wheel locks,
7.
open the footrest/legrest for clearance and transfer into the wheelchair. Refer to Transferring To and From Other Seats
on page 21.
FIGURE 6
Folding/Unfolding the Wheelchair
Seat Rail
H-Blocks
Press down on the seat rail and the seat
upholstery with the entire hand. DO NOT
place any part of the hand under the seat rail.
DO NOT wrap thumb
or fingers under the
seat rail. Point fingers
and thumb to the inside
of the wheelchair.