JBL JSR 675 Owners Manual English - Page 10

12. VIDEO/AUDIO INPUT (PLAY) JACKS OF VCR 1 Connect these jacks to the corresponding AUDIO OUTPUT jacks of your VCR. 13. VIDEO/AUDIO OUTPUT (REC) JACKS OF VCR 1 Connect these jacks to the corresponding INPUT jacks of a VCR. VIDEO OUTPUT jack: Connect this jack to the VIDEO INPUT jack of the VCR. AUDIO REC jack: Connect these jacks to the AUDIO INPUT jacks of the VCR. 14. VIDEO/AUDIO INPUT (PLAY) JACKS OF VCR 2 Connect these jacks to the corresponding OUTPUT jacks of your VCR or VDP. 15. VIDEO MONITOR JACK Connect this jack to the VIDEO INPUT jack of a TV/MONITOR. 16. REMOTE OUT JACK Connect this jack to the REMOTE IN jack on a Harman Kardon component. Use one of the accessory mini-plug cables. You can control some Harman Kardon components in your system using the JSR675 remote commander. 17. MULTI-ROOM REMOTE IN JACK Connect a remote IR sensor to this jack. You can operate the unit by remote commander through the adapter. It is convenient when the unit is located in a separate room. (See page 10) 18. FRONT, CENTER, REAR PRE OUT AND MAIN IN JACKS FRONT PRE OUT When a separate power amplifier is used to drive the front speakers, connect the power amplifier input to these jacks. FRONT MAIN IN When a separate pre-amplifier is connected and this unit is used as a power amplifier, connect the preamplifier output to these jacks. NOTE: When you do not use the PRE OUT and MAIN IN separately, always connect the PRE OUT and MAIN IN jacks with a jumper plug. CENTER PRE OUT When a separate power amplifier is used to drive the center speaker, connect the power amplifier input to these jacks. REAR PRE OUT When a separate power amplifier is used to drive the rear speaker, connect the power amplifier input to these jacks. 19. SPEAKER TERMINALS (1, 2 and CENTER) Connect the main left (L) and right (R) speakers to the corresponding 1 and 2 speaker terminals. Connect the center speaker to the center (+), (-) terminals. Make sure that the positive (+) and negative (-) terminals on the speaker are connected to the corresponding terminals on the receiver. 20. REAR SPEAKER TERMINALS Connect rear speakers to the corresponding terminals. 21. AC INPUT CORD Plug this cord in AC outlet on a wall. 22. SUBWOOFER OUT When a powered subwoofer or separate power amplifier is used to power a subwoofer connect these jacks to the input of the amplifier (for subwoofer or powered subwoofer). 23. AC SWITCHED OUTLET This outlet provides AC power. The AC power is switched by the power button. Use this outlet for a source component, such as a CD player. 9